iPhone SE Battery Replacement & Repair Guide

With hundreds of guides and experts, PhoneRepair.com is the most complete and trusted phone repair resource.

What does this iPhone SE battery replacement guide cover?

The supreme guide to iPhone SE battery replacement covers.

  • A step by step guide , so that you can repair your phone.
  • A description of all of the repair tools and part suppliers.
  • An overview of Apple repair services.
  • Also an overview of 3rd party repair options.

Start Your Phone Repair Now!

Your FREE Step By Step Guide Starts Below

Before you start – iPhone SE battery replacement

Use this method to repair a damaged battery in an iPhone SE. The guide covers everything you need to do.

If the glass is also broken on your device, it is best to tape the front display to prevent injury.

iphone SE battery replacement

Next Step

Move On To Step 2

Remove the screws using the pentalobe screwdriver

Switch the power off and make sure you have the right tools (see guide below). You also need a new battery.

Remove the screws either side of the charging port, using the pentalobe screwdriver.

iphone SE battery repair

Next Step

Move On To Step 3

Apply the suction cup to the screen

Place the suction cup onto the screen. Place it lower down near the home button. Gently pull upward, so you can see the gap between the frame.

suction cup iphone se

Next Step

Move On To Step 4

Gently work the phone screen open

Gently use the case opener tool. Work it around the gap until it becomes loose.

iphone 5 plastic screen replacement tool

Next Step

Move On To Step 5

Open the phone screen slightly

Locate the metal bracket which covers the home button cable. Prise the bracket off the phone. Remove it from the phone.

(When re-assembling make sure the edge of the bracket with 2 slits is facing the battery).

open screen iphone se

Next Step

Move On To Step 6

Remove the home button cable

Carefully prise up the home button cable connector from it’s socket.

Now you can open the phone screen up.

remove home button cable

Next Step

Move On To Step 7

Remove the screws attaching the battery connector

The screen needs to be pulled back. Be careful not to pull it too far. This is because the cables are still attached. Take out the 2 screws that are holding the battery connector down.

remove battery connector

Next Step

Move On To Step 8

Remove the battery connector

The battery connector shield is now loose. Keep the screws safe. Now take the shield out.

remove battery connector

Next Step

Move On To Step 9

Disconnect the battery cable

Using the case opener tool disconnect the battery, by gently releasing the battery cable connector from it’s housing.

disconnect cable iphone SE battery

Next Step

Move On To Step 10

Remove the front panel bracket

Remove the highlighted screws and remove the bracket.

unscrew front bracket iphone se

Next Step

Move On To Step 11

Disconnect the camera, sensor & LCD cables

Remove 3 cables behind the bracket. The front camera cable, the LCD cable and the sensor cable.

lcd-cable-iphone-se sensor-cable-iphone-se camera-cable-iphone-se

Next Step

Move On To Step 12

Remove the screen from the phone

Now you can fully detach the screen from the phone.

detach screen iphone se

Next Step

Move On To Step 13

Release the battery adhesive tab

Release the battery adhesive tab by locating it at the bottom of the battery (headphone jack end).

Then pull each strip carefully down and away from the battery to loosen the adhesive.

battery adhesive iphone sepull battery adhesive strip down away from iphone se

Next Step

Move On To Step 14

Remove the battery

Carefully warm the phone with a hairdryer or phone repair warmth blanket like the iOpener.

Then slide a plastic card between the battery and the device. This will release the battery so you can replace it.

detach battery iphone SE

Well done you did it!

Reverse the steps to reassemble your iPhone SE